YU Anbin, YE Jinming, ZHANG Kaiqi. Numerical simulation on bearing force of propeller for machining errors in non-uniform inflow[J]. Chinese Journal of Ship Research, 2017, 12(2): 78-83. DOI: 10.3969/j.issn.1673-3185.2017.02.010
Citation: YU Anbin, YE Jinming, ZHANG Kaiqi. Numerical simulation on bearing force of propeller for machining errors in non-uniform inflow[J]. Chinese Journal of Ship Research, 2017, 12(2): 78-83. DOI: 10.3969/j.issn.1673-3185.2017.02.010

Numerical simulation on bearing force of propeller for machining errors in non-uniform inflow

  • In order to study the bearing force caused by the machining errors of composite material propeller in non-uniform flow, the propeller was computed by changing the machining error of the propeller in six degrees of freedom, in which the main blade translates and rotates along the coordinate axis artificially by way of the statistical method. The bearing force of a DTMB P4119 propeller with a machining error was calculated according to the SST k-ω model and sliding meshing non-uniform flow to figure out the impact of various machining errors on the propeller, enabling a fundamental rule about the impact of various machining errors on a propeller's bearing force to be formed. The results show that vertical bearing force and horizontal bearing force increase linearly, and first-order blade frequency bearing force rarely changes with the increase of machining errors in each freedom; machining errors along the directions of diameter and pitch have a great impact on the propeller shaft's frequency bearing force. Therefore, we can put forward a more refined principle about the machining accuracy of propellers.
  • loading

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return