付森宗, 王鸿东, 易宏. 舰船建造质量量化评价方法[J]. 中国舰船研究, 2017, 12(2): 143-150. DOI: 10.3969/j.issn.1673-3185.2017.02.019
引用本文: 付森宗, 王鸿东, 易宏. 舰船建造质量量化评价方法[J]. 中国舰船研究, 2017, 12(2): 143-150. DOI: 10.3969/j.issn.1673-3185.2017.02.019
FU Senzong, WANG Hongdong, YI Hong. Quantitative analysis method for ship construction quality[J]. Chinese Journal of Ship Research, 2017, 12(2): 143-150. DOI: 10.3969/j.issn.1673-3185.2017.02.019
Citation: FU Senzong, WANG Hongdong, YI Hong. Quantitative analysis method for ship construction quality[J]. Chinese Journal of Ship Research, 2017, 12(2): 143-150. DOI: 10.3969/j.issn.1673-3185.2017.02.019

舰船建造质量量化评价方法

Quantitative analysis method for ship construction quality

  • 摘要:
      目的  对舰船建造质量进行准确评价是装备实现既定任务目标的保障。由于舰船建造样本量小、加工类型多样、工艺路线非标准化,长期以来,对于舰船建造质量的研究缺乏数据信息的支撑,通常以定性分析为主。为实现对舰船建造质量的量化评价和有效控制,
      方法  针对建造工艺故障的随机性和不确定性,在以功能为导向的质量控制(FOQC)方法提出的工艺-质量参数模型基础上,基于模糊数学理论集成专家评分方法,将顺序关联、串联、混联工艺可靠度计算模型与模糊评分方法结合,提出舰船建造质量定量评价流程和工艺可靠度模糊计算方法。
      结果  以某型号舰船轴系齿轮箱安装建造为实例进行计算,验证了方法的可用性和有效性。
      结论  计算结果可为关键质量检验点设置及关键工艺控制优化提供参考。

     

    Abstract: The excellent performance of a ship is assured by the accurate evaluation of its construction quality. For a long time, research into the construction quality of ships has mainly focused on qualitative analysis due to a shortage of process data, which results from limited samples, varied process types and non-standardized processes. Aiming at predicting and controlling the influence of the construction process on the construction quality of ships, this article proposes a reliability quantitative analysis flow path for the ship construction process and fuzzy calculation method. Based on the process-quality factor model proposed by the Function-Oriented Quality Control (FOQC) method, we combine fuzzy mathematics with the expert grading method to deduce formulations calculating the fuzzy process reliability of the ordinal connection model, series connection model and mixed connection model. The quantitative analysis method is applied in analyzing the process reliability of a ship's shaft gear box installation, which proves the applicability and effectiveness of the method. The analysis results can be a useful reference for setting key quality inspection points and optimizing key processes.

     

/

返回文章
返回