Dong LIU, Yuelin ZHANG, Wu CHEN. Deformation analysis of horizontal stiffened cylindrical shells under the effects of gravity[J]. Chinese Journal of Ship Research, 2017, 12(1): 72-77. doi: 10.3969/j.issn.1673-3185.2017.01.011
Citation: Dong LIU, Yuelin ZHANG, Wu CHEN. Deformation analysis of horizontal stiffened cylindrical shells under the effects of gravity[J]. Chinese Journal of Ship Research, 2017, 12(1): 72-77. doi: 10.3969/j.issn.1673-3185.2017.01.011

Deformation analysis of horizontal stiffened cylindrical shells under the effects of gravity

doi: 10.3969/j.issn.1673-3185.2017.01.011
  • Received Date: 2016-03-13
    Available Online: 2016-12-28
  • Publish Date: 2017-01-07
    © 2017 The Authors. Published by Editorial Office of Chinese Journal of Ship Research. Creative Commons License
    This is an Open Access article distributed under the terms of the Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • In order to study the deformation of submarine pressure hulls under the effects of gravity, a sim-ple calculation formula of the deformation of the free ends of stiffened cylindrical shells is derived based on moment theory and non-moment theory, and the calculated results are compared with the results of Finite Element Analysis (FEA) which tests the reliability of the formula. The results show that when a thin-wall cylindrical shell simply supported at the bottom is affected by its own gravity, the deformation degree at the free end is directly proportional to the fourth power of the inner diameter of the cylindrical shell, and in-versely proportional to the square of the wall thickness; for cantilever cylindrical shells, the gravity load has little effect on the roundness of the free end plane. With the nonlinear increase of distance between the free end and fixed supporting end, the increase rate increases gradually. With the increase of the inner di-ameter of the cylindrical shell, the deformation degree of the free end decreases gradually. When the inner diameter of the cylindrical shell is 0.75 times its longitudinal length, the deformation degree of the free end is at a minimum, then increases gradually as the inner diameter increases. The gravity deformation calcula-tion of ring stiffened cylindrical shells in a horizontal state and the strengthening measures can provide ref-erences for further study.
  • loading
  • [1]
    杨江军.总装化造船在新型企业中的应用研究[D].上海:上海交通大学, 2008.
    [2]
    许月仲.北方某船厂现代造船模式主流程优化实施方案研究[D].哈尔滨:哈尔滨工程大学, 2007.
    [3]
    王承文.现代造船模式研究[D].哈尔滨:哈尔滨工程大学, 2006.
    [4]
    孔祥昆.现代造船模式与方法分析研究[D].哈尔滨:哈尔滨工程大学, 2009.
    [5]
    王安稳, 郭日修.锥-环-柱结合壳的应力和稳定性[J].中国造船, 1995(3):54-61. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGZC199503007.htm

    WANG A W, GUO R X. Stress and stability of cone-toroid-cylinder complex shells[J]. Shipbuilding of China, 1995(3):54-61(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-ZGZC199503007.htm
    [6]
    朱邦俊, 王丹, 万正权.端部球面舱壁应力近似解析解[J].船舶力学, 2011, 15(11):1255-1263. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-ZGZC201008001042.htm

    ZHU B J, WANG D, WAN Z Q. An analytical solution for stresses of the end spherical bulkhead[J]. Ship Mechanics, 2011, 15(11):1255-1263(in Chinese). http://cpfd.cnki.com.cn/Article/CPFDTOTAL-ZGZC201008001042.htm
    [7]
    SHEN X Q, LI K T, MING Y. The modified model of Koiter's type for nonlinearly elastic shell[J]. Applied Mathematical Modeling, 2010, 34(11):3527-3535. doi: 10.1016/j.apm.2010.03.003
    [8]
    PAIMUSHIN V N. A theory of thin shells with finite displacements and deformations based on a modified Kirchhoff-Love model[J]. Journal of Applied Mathematics and Mechanics, 2011, 75(5):568-579. doi: 10.1016/j.jappmathmech.2011.11.011
    [9]
    黄旎, 夏飞.球-环-锥组合壳在外压下的强度计算方法评述[J].舰船科学技术, 2011, 33(9):7-10. http://www.cnki.com.cn/Article/CJFDTOTAL-JCKX201109003.htm

    HUANG N, XIA F. Discussion on the calculation methods of the strength of sphere-toroid-cone combined shells strength under external pressure[J]. Ship Science and Technology, 2011, 33(9):7-10(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JCKX201109003.htm
    [10]
    龚良贵, 李情.修正迭代法求解球壳非线性弯曲问题[J].江西科学, 2010, 28(2):158-161. http://www.cnki.com.cn/Article/CJFDTOTAL-JSKX201002008.htm

    GONG L G, LI Q. Modified iteration method on nonlinear bending problem of spherical shell[J]. Jiangxi Science, 2010, 28(2):158-161(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-JSKX201002008.htm
    [11]
    郑衍双, 陆正福, 张定武.均匀外压下有几何缺陷球壳的破坏压力[J].中国造船, 1986(1):50-60. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGZC198601006.htm

    ZHENG Y S, LU Z F, ZHANG D W. Collapse pressure of spherical shells with initial imperfections under uniform pressure[J]. Shipbuilding of China, 1986(1):50-60(in Chinese). http://www.cnki.com.cn/Article/CJFDTOTAL-ZGZC198601006.htm
    [12]
    吕岩茂.薄壁筒体卧置状态圆度的探索[J].化学工业与工程技术, 2004, 25(1):49-54. http://www.cnki.com.cn/Article/CJFDTOTAL-HXGJ200401020.htm
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(8)  / Tables(3)

    Article Metrics

    Article views (185) PDF downloads(118) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return