CATIA modeling method of ship hull with hull line as data input

  Objective  To simplify the ship modeling process and improve modeling efficiency, this paper proposes a method for rapidly implementing hull model creation based on hull line drawing.

  Methods  Using the CATIA platform, this method adopts the component application architecture (CAA) development tool for secondary development. First, by reading the geometry elements and label information of the hull lines in a drawing, the transformation of the offset points from 2D to 3D is realized. On this basis, the creation of the hull lines, stern and bow is completed, and a 3D wireframe model obtained. Finally, the hull 3D modeling is completed in conjunction with the CATIA native surface creation command. The stability and reliability verification of the developed type value extraction and bow generation program is then carried out via application analysis.

  Results  The results show that the compiled program can realize the automatic creation of offset points, transverse lines, waterlines, profile lines and other boundary lines except the top line of the wall, and the centerline and tangent lines created by the bow generator are easily modified and simple for users to operate.

  Conclusions  The verification results show that the method of a creating hull model using "Generative Shape Design" and "Drafting" with the hull line drawing as the data input is stable, reliable and able to realize rapid hull modeling, giving it certain practical value.